Tango TX1 Single Gas Detector

The Tango TX1, with 2-year run time and DualSense Technology, increases worker safety, regardless of bump test frequency, while reducing overall costs.

  • DualSense Technology  increases worker safety by using two
    sensors to detect the same gas
  • Guaranteed for Life™ with replaceable sensors and batteries that
    extend the life of the instrument
  • Optional AlarmAmp™ increases audible alarms to 110dB
  • Acknowledgeable gas alerts

Overview

  1. By wearing the Tango TX1 Portable gas detector, your workers will be the safest single gas monitor users in the world. 2-year run time and patented DualSense Technology increase worker safety, regardless of bump test frequency, while reducing overall costs.
    • Significantly increases worker safety – DualSense Technology ensures that, regardless of your current bump test policy, you will be significantly safer with the Tango than with any other single gas instrument on the market today. *
    • Longer battery life – Operates continuously in an “always-on” mode for two years. After the battery can no longer support instrument life, it can be replaced for another two years of continuous operation.
    • Louder instrument alarm – Alarms at 100dB at 10 centimeters making it twice the volume of Industrial Scientific’s GasBadge units and louder than any single gas instrument on the market. Alarm volume can be increased by about 10dB for higher-noise environments with the addition of the optional AlarmAmp™.

Description

INSTRUMENT WARRANTY: Guaranteed for Life. Warranted for as long as the instrument is supported by Industrial Scientific Corporation (excludes sensors, batteries, and filters). CO and H2S sensors are warranted for three years. All other sensors are warranted for two years.
DISPLAY: Segment liquid crystal display (LCD)
KEYPAD: Two buttons
CASE MATERIALS: Case top: Polycarbonate with a protective rubber overmold

Case bottom: Conductive polycarbonate

ALARMS: Three strobe-emitting visual alarm LEDs (two red; one blue);

100 decibel (dB) audible alarm at a distance of 10 cm (3.94″); Vibration alarm

DIMENSIONS: 99 x 51 x 35 mm (3.9″ x 2.0″ x 1.4″)
WEIGHT: 126.0 g (4.4 oz.)
TEMPERATURE RANGE: -40°C to +50°C (-40°F to +122°F)
HUMIDITY RANGE: 15% to 95% Non-condensing (continuous)
SENSORS: CO, CO/H2, HCN, H2S, NH3, NO2, SO2—Electrochemical sensor technology
Sensor measuring ranges:  Ammonia (NH3 ): 0 to 500 ppm in 1 ppm increments)

Carbon Monoxide (CO): 0 to 1,000 ppm in 1 ppm increments

Carbon Monoxide (CO/H2 low): 0 to 1,000 ppm in 1 ppm increments

Hydrogen Cyanide (HCN): 0 to 30 ppm in 0.1 ppm increments

Hydrogen Sulfide (H2 S): 0 to 500.0 ppm in 0.1 ppm increments

Nitrogen Dioxide (NO2 ): 0 to 150.0 ppm in 0.1 ppm increments)

Sulfur Dioxide (SO2 ): 0 to 150.0 ppm in 0.1 ppm increments)

BATTERY: 3.6 V Primary lithium-thionyl chloride (Li-SOCl2); 1.5AH, 2/3AA; replaceable; non-rechargeable; always on; up to 2-year run time depending on operating conditions
DATA LOGGING: 3 months at 10-second intervals
EVENT LOGGING: 60 alarm events
CERTIFICATIONS INGRESS PROTECTION IP66/67

-40 °C to 50 °C (-40 °F to 122 °F)

ATEX: Ex ia I Ma; Ex ia IIC T4 Ga; Equipment Group/Category: I M1/II 1G

CSA : Cl I, Gr A-D, T4; Ex ia IIC T4

IECEx: Ex ia I Ma; Ex ia IIC T4 Ga

INMETRO: Ex ia I Ma; Ex ia IIC T4 Ga

UL (C-US): Cl I, Gr A-D, T4; Cl II, Gr E-G; Cl I, Zone 0, AEx ia IIC T4

-20 °C to 50 °C (-4 °F to 122 °F)

China Ex: Ex ia IIC T4 Ga

CMA: Ex ia I Ma; H2S, CO

EAC: PO Ex ia I X; 0 Ex iX IIC T4 X

KC: Ex ia IIC T4

Additional information

Model

Sub Brand

Product Type

Tango_SpecSheet_EN

Download

Sensors Available by Monitor

Download