Description

WARRANTY

The following components are warranted for four (4) years from the device’s date of manufacture: monitor, pump, and CO/H2S/O2/LEL sensors. All other components are warranted for two (2) years from the device’s date of manufacture.**

 

CASE MATERIAL

Polycarbonate with protective rubber overmold

 

DIMENSIONS

103 x 58 x 30 mm (4.1 x 2.3 x 1.2 in) without pump, lithium-ion battery version

172 x 67 x 66 mm (6.8 x 2.6 x 2.6 in) with pump, lithium-ion battery version

 

WEIGHT

182 g (6.4 oz) without Pump, lithium-ion battery version

380 g (13.4 oz) with Pump, lithium-ion battery version

 

POWER SOURCE/RUN TIME

Rechargeable slim extended lithium-ion battery

(18 hours typical @ 20 ºC) without Pump

Rechargeable lithium-ion battery

(12 hours typical @ 20 ºC) without Pump

Rechargeable extended-range lithium-ion battery

(20 hours typical @ 20 ºC) without Pump

(12 hours typical @ 20 ºC) with Pump

Replaceable AAA alkaline battery

(8 hours typical @ 20 ºC) without Pump

(4 hours typical @ 20 ºC) with Pump

 

ALARMS

Ultra-bright LEDs, loud audible alarm (95 dB at 30 cm) and vibrating alarm

 

DISPLAY/READOUT

Backlit liquid crystal display (LCD)

 

TEMPERATURE RANGE

-20 °C to 50 °C (-4 °F to 122 °F) ***

 

HUMIDITY RANGE

15% to 95% Non-condensing (continuous)

 

SENSORS

Combustible gases/methane – Catalytic Bead

O2, CO, CO/H2 low, H2S, NO2, SO2 – Electrochemical

 

MEASURING RANGES

Combustible Gases:                    0-100% LEL in 1% increments

Methane (CH4):                             0-5% of vol in 0.01% increments

Oxygen (O2):                                  0-30% of vol in 0.1% increments

Carbon Monoxide                       (CO/H2 low): 0-1,000 ppm in 1 ppm increments

Carbon Monoxide                       (CO): 0-1,000 ppm in 1 ppm increments

Hydrogen Sulfide                         (H2S): 0-500 ppm in 0.1 ppm increments

Nitrogen Dioxide                         (NO2): 0-150 ppm in 0.1 ppm increments

Sulfur Dioxide                               (SO2): 0-150 ppm in 0.1 ppm increments

 

CERTIFICATIONS

INGRESS PROTECTION IP66/67

ANZEx:                         Ex ia s Zone 0 I/IIC T4

ATEX:                            Ex ia IIC T4 Ga and Ex ia I Ma; Equipment Group and Category II 1G/I M1

China CMC:                Metrology approval

China CPC:                  CPA 2017-C103

China Ex:                     Ex ia IIC T4 Ga; Ex ia d I Mb

China KA:                    Approved for Underground Mines with CO, H2S, O2 and CH4

China MA:                   Approved for Underground Mines with CO, H2S, O2 and CH4

(Note: Diffusion 17144453 pack only)

CSA:                               Cl I, Div 1, G A-D, T4; Ex d ia IIC T4

EAC:                               PB Ex d ia I X/1Ex d ia IIC T4 X

IECEx:                            Ex ia IIC T4 Ga

INMETRO:                   Ex ia IIC T4 Ga

KC:                                 Ex d ia IIC T4

KIMM:                          Ex d ia IIC T4

MSHA:                          30 CFR Part 22; Permissible for underground mines; Li-ion

PA-DEP:                       BFE 46-12 Permissible for PA Bituminous Underground Mines;

Charger/docking station accessories; Category 1

SANS:                            SANS 1515-1; Type A; Ex ia I/IIC T4; Li-ion

TIIS:                               Ex ia IIC T4 X

UL:                                 Cl I, Div 1, Groups A-D, T4; Zone 0, AEx ia IIC T4;

Cl II, Gr F-G (Carbonaceous and Grain dust)

 

SUPPLIED WITH MONITOR

Calibration Cup (without pump), Sample Tubing (with pump), Reference Guide